product parameters
The TAG-9000 remote wireless HV phase tester (hereinafter referred to as the "instrument") is used to remotely verify whether the high-voltage phase is in phase and whether the phase sequence color is marked correctly. It can also be used for close range grid connection or ring network phase detection. The instrument is suitable for 5V~220kV AC transmission lines and secondary live display phase detection, and also has the function of line live detection.
The instrument adopts wireless transmission technology and GPS timing technology, which is safe and reliable to operate, easy to use, and overcomes many disadvantages of wired phase detectors.
Technical parameters
Phase difference accuracy | Error≤5° |
Frequency accuracy | ±0.1Hz |
Cross voltage measurement range | 5V～220kV |
Maximum transmission line of sight for transmitter and receiver host | About 100 meters |
Distance between two hosts during remote nuclear phase | 0.3 kilometers to 800 kilometers |
Leakage current during high voltage measurement | |
Transmitter operating power consumption | |
Power consumption of the receiving host during operation | |
work environment | -35℃-+45℃Humidity≤95% RH |
Whole machine weight | About 11kg |
Instrument packaging size | 71cm x 26cm x 11cm (length x width x height) |
Product Features
1. The maximum transmission line of sight for the transmitter and receiver is about 100 meters.
2. The distance between the two hosts during remote nuclear phase is 0.3 kilometers to 800 kilometers.
3. Real person voice prompts for measurement results and operation steps.
4. The 3.2-inch color screen displays the phase difference, frequency, vector diagram, and same or different phase results of two lines simultaneously, as well as information such as the number of GPS satellites, GPS timing status, and time.
5. Automatically shut down after 1 hour of no operation.
6. Both the transmitter and receiver are equipped with rechargeable lithium batteries and a 5V charger.
7. The host is equipped with an 18650 lithium battery with a capacity of 2500mAH. The transmitter is equipped with a 14430 lithium battery with a capacity of 450mAH.
8. The measurement range for cross voltage is 5V to 220kV.
Safety precautions
1. During on-site testing, operations should be carried out in accordance with the safety distance standards for high-voltage testing set by the power department.
2. The standard configuration is a 3-meter insulated pole, corresponding to a voltage level of≤220kV. If the measured line voltage is higher than 220kV, please use insulated poles with a length greater than 3 meters.
3. When operating the nuclear phase, do not hold it beyond the position of the insulating rod handle
Maintenance and upkeep
1. Please fully charge before storing when not in use for a long time.
2. This product should not be stored in damp, high temperature, or dusty environments.
3. The insulation rod should undergo a voltage withstand test before its first use, and an annual voltage withstand test should be conducted.
