Product introduction
The Battery Charge and Discharge Tester is a specialized testing device used for detecting, evaluating, and maintaining battery performance. By performing controlled charging, constant-current discharging, capacity testing, cycle testing, and data logging on batteries, it determines the actual capacity, state of health (SOH), remaining service life, and whether there are any performance degradation issues.
 |  |
Product functions
1. Battery capacity testing (core function)
By setting the discharge current and allowing the battery to discharge under specified conditions, the following parameters are recorded simultaneously:
Discharge voltage variation
Kasalukuyang naglalabas
Discharge time
Output capacity (Ah)
Output energy (Wh)
2. Battery charge-discharge cycle testing
The equipment can automatically execute:
Charge → Discharge → Recharge → Redischarge
Cycle testing for battery life evaluation.
Primarily used for:
New battery life verification
Battery consistency analysis
Aging testing
R&D testing
3. Battery maintenance and activation
For long-term standby batteries (e.g., UPS, power system batteries), prolonged floating charging may lead to:
Capacity degradation
Imbalance among individual cells
Plate sulfation
Mga teknikal na parameter
Mga Teknikal na Parameter
| Working mode | maaaring gamitin nang mag-isa, maaaring gamitin nang sabay-sabay, maaaring remote control at pagsubaybay sa katayuan | |||
| Applicable battery | 48V | 110V | 220V | 380V |
| Nagcha-charge ng boltahe | 40～60V | 95～150V | 190～300V | 350～450V |
| Kasalukuyang nagcha-charge | 10～150A | 1～80A | 1～40A | 1～20A |
| Boltahe sa paglabas | 10～60V | 80～135V | 80～270V | 300～460V |
| Kasalukuyang naglalabas | 0～150A | 0～200A | 0～100A | 0～60A |
| Katumpakan ng kasalukuyang | 1% | |||
| Katumpakan ng boltahe | 0.5% | |||
| Katumpakan ng boltahe ng monomer | 0.2% | |||
| Boltahe ng monomer | 0.500V～16.00V(resolution 1mv) | |||
| Oras ng paglabas ng singil | 0 ~ 99 na oras at 59 minuto | |||
| Power supply | AC:220V/380V | |||
| Paraan ng paglamig | sapilitang paglamig ng hangin | |||
| Paraan ng paghawak | industrial universal wheel | |||
Kapaligiran sa Trabaho
| Pagwawaldas ng init | sapilitang paglamig ng hangin |
| Temperatura | working range: -5 ~ 50℃ storage temperature: -40 ~ 70℃ |
| Halumigmig | relative to humidity0 ~ 90% (40±2℃) |
| Altitude | na-rate na altitude: 4000 m |
| ingay | ﹤60dB |
Gumaganang Power Supply
| Boltahe | single-phase three-wire system: 220V AC (- 20% ~ +30%), dalas :45 ~ 65Hz |
| Makatiis sa pagsubok ng boltahe | input - pabahay: 2200V DC 1min |
| input-output: 2200V DC 1min | |
| output - pabahay: 700V DC 1min | |
| Seguridad | matugunan ang EN610950 |
Mga kable
| AC input | Gb socket, suitable for 1 ~ 1.5mm2kable |
| DC output | instrument 25 mm2Cable quick connect plug (red positive black negative) |
Palayaw: Baterya Charge Discharge Tester; Tester ng Pagsingil ng Baterya
Mga tampok
1. Limang-sa-isang pagsasama ng pagsingil, pagdiskarga, pag-detect ng isang yunit, online na pagsubaybay at pag-activate, na may kumpletong mga function at multi-purpose na function;
2. Single-cell boltahe wireless monitoring function, ang bawat wireless monitoring module ay maaaring subaybayan ang 12 monomer sa parehong oras;
3. Gamit ang Chinese background analysis software, na may remote control discharge function;
4. The host has a USB interface and a 2G large-capacity internal data storage space;
5. Paggamit ng dalawahang CPU upang magtulungan upang matiyak ang kaligtasan, pagiging maaasahan at katumpakan ng pagsubok;
6. Maaaring isagawa ang pause at pagbabago ng parameter sa panahon ng proseso ng paglabas nang hindi tinatapos ang pagsubok sa paglabas.
Application Scenarios
Substations
Testing the capacity and state of health (SOH) of DC screen battery banks
Used for periodic battery maintenance and acceptance testing
Power plants
Testing the performance of backup power batteries at power stations
Ensuring reliable power supply during emergency situations
Telecom base stations / communication rooms
Testing the capacity of communication backup batteries
Ensuring operation of communication equipment during power outages
Data centers / UPS rooms
Testing the discharge capability of UPS battery banks
Preventing backup power failure
New energy storage power stations
Testing the performance of energy storage battery clusters
Used for lithium battery capacity and cycle life testing
Battery manufacturers
Used for factory testing of cells, battery modules, and PACKs
Performing charge-discharge cycle testing
New energy vehicle industry
Testing the performance and degradation of power batteries
Used for battery maintenance and R&D analysis
Research institutions / laboratories
Used for new battery R&D and performance research
FAQs
Q: What isa Battery Charge and Discharge Tester?
A: A Battery Charge and Discharge Tester is a testing device used to evaluate the charging and discharging performance and capacity status of batteries. It can assess battery health, remaining capacity, and service life.
Q: What types of batteries is this device suitable for?
A: It is suitable for:
Lead-acid batteries
Valve-regulated lead-acid batteries (VRLA)
UPS batteries
Lithium iron phosphate (LiFePO₄) batteries
Ternary lithium batteries
Energy storage battery packs, and more.
Q: Why is battery charge-discharge testing necessary?
A: Through testing, it is possible to:
Determine whether the actual battery capacity meets the specified standards
Identify batteries with capacity degradation
Prevent backup power failures in advance
Extend battery service life
Improve the reliability of the power supply system
Q: What is the difference between a battery charge-discharge tester and an ordinary battery charger?
A: An ordinary battery charger can only charge the battery, while a battery charge-discharge tester can:
Perform active discharge testing
Measure capacity
Record data
Analyze battery performance
